![]() |
BreadBoarder Micro Arduino-Compatible Breakout-Prototyping Board |
![]() |
LCDuino - Tiny self-contained Arduino-compatible display board for 2x8 LCD's, and with lots of I/O! |
![]() |
BreadBoarder Dual-Motor Shield $9.95 A super-handy shield for the Cal-Eng BreadBoarder series. Includes a 754410 (L293D) motor driver chip, I2C/Wire interface, and lots of extra I/O headers that use the standard hobby-servo pinout (-/+/signal). It also features two I/O headers that are powered at battery voltage level (trace selectable) for high-speed servos, and other high-voltage uses. |
![]() |
Breadboarder LCD Shield $8.95 Another shield for the Cal-Eng BreadBoarder series. Offers headers for standard 2x8 LCDs, and mini-LCD displays that use a ribbon cable, as well as an I2C/Wire interface, and lots of extra I/O headers that use the standard hobby-servo pinout (-/+/signal). It also features four I/O headers that are powered at battery voltage level (or via an independent regulator) for high-speed servos, and other high or low-voltage uses. |
![]() |
BreadBoarder-328 v2/FT USB Arduino-Compatible Breakout/Prototyping Board $24.95 This is the latest revision of the BreadBoarder-328 USB Arduino-compatible breakout/prototyping Board. It has been resisized to match the BreadBoarder-32U4 layout, to make it mini-shield compatible. It features the industry-standard FTDI FT232RL USB VCP, and on-board 1A regulation for 6V-15V battery/externally powered applications. |
![]() |
BreadBoarder DIP USB Arduino-Compatible Breakout-Prototyping Board $16.95 For those that like to use classic DIP AVR chips, this is the all-inclusive socketed DIP version of the BreadBoarder USB Arduino-compatible breakout/prototyping board. Others offer breadboard-ready boards with either USB or on-board regulation, why not get both?! It features the industry-standard FTDI FT232RL USB VCP, and on-board 1A regulation for 6V-15V battery/externally powered applications. To make it mini-shield compatible, it has been sized to match the BreadBoarder-32U4 layout. Due to the overall size though, the power connection will need to be made via wires when using a mini-shield. |
![]() |
AVR-DIP Arduino-Compatible Breakout Board $11.95 A simple AVR DIP breakout board, that breaks out all the AVR pins onto RC servo-type headers (-/+/signal). Just like the Breadboarders, it follows the Arduino pinout to make it easy to find pin assignments. It features our standard 5-pin USB VCP/Bluetooth connector, on-board 1A regulation for battery powered applications, and two I/O headers that are powered at battery voltage level (trace selectable) for high-speed servos, and other high-voltage uses. |
-
Primary Widget Area
-
This theme has been designed to be used with sidebars. This message will no
longer be displayed after you add at least one widget to the Primary Widget Area
using the Appearance->Widgets control panel.
- Log in